E
A
G
L
E
Please fill out the form below and we will get back to you as soon as possible.
- Call:+86-133-6205-8186
- Mail:larry01@qq.com
EA468-3020/6P, EA468-5020/6P
Programming Cyling Machine
1.The maximum sewing speed is set to 1800rpm at the factory.
2.The lifting amount of the middle presser foot indicates the amount of lifting of the middle presser foot when the sewing machine stops.
3.The up and down stroke of the middle presser foot indicates the amount of up and down movement of the sewing machine's middle presser foot during sewing.
4.Depending on the number of pins in the graphics, the maximum number of graphics stored may sometimes be limited.
Specifications
| Model | EA468-5020/6P | EA468-3020/6P |
| Shuttle bed | 6 times larger automatic thread cutting rotary shuttle | |
| Machine needle type | DDX1#250(standard) | |
| Optional sewing range | X-axis (left/right)500mm; Y-axis (front/rear)200mm | X-axis (left/right)300mm; Y-axis (front/rear)200mm |
| Maximum sewing speed | 100-1800rpm | |
| Feeding method | Intermittent and continuous feeding (switching mode) | |
| stitch length | 0.1-12.7mm (minimum resolution 0.1mm) | |
| Maximum number of stitches | 20000 stitches/pattern per pattern | |
| storage capacity | 9000 graphics (control box memory) | |
| Data storage method | Control box memory, USB flash drive (non sewing machine accessory) | |
| Needle bar stroke | 53mm | |
| Wire rod travel | 103mm | |
| Medium pressure foot lifting method | Stepper motor drive (optional), cylinder lift (standard) | |
| Medium pressure foot lift | 15mm (factory set to 12mm) | |
| Medium pressure foot up and down travel | 4-10mm (factory set to 8mm) | |
| External pressure plate lifting amount | 35mm | |
| Lift and press foot driving method | Cylinder driven | |
| Wire cutting system | Motor driven (small mouth structure using cylinder drive), flat blade structure | |
| lubrication system | Digital system control lubrication+oil injection into the oil box through the oil core feeding type | |
| lubricant | 20 white oil | |
| Controller model | 6E442RT | |
| spindle | AC servo motor 750W | |
| operation panel | 7-inch color LCD touch screen, equipped with USB connection port | |
| air pressure | 0.5Mpa 1.8L/min | |
| External dimensions of packaging box | 1200mm(W)*1200mm(L)*1450mm | |
| total weight | Net weight: Gross weight: | |
| power supply | 200V-240V single-phase | |